TZRZ-5 Ointment Vacuum Emulsifier Mixer

It is a coaxial and double type mixer, suitable to stable homogenizing and emulsifying, the finished granular is very small. 3.1  Emulsify mixer boiler:

Working volume: 5L, material: SUS316L stainless steel, electricity heating and water-cooling

Structure: With 3-layer structure, upper and lower end sockets. The upper end socket is connected to the  tank  body  with  flange  between  them.  The  internal  layer  of  tank  body is  made  of  4  mm  thick SUS316L stainless steel and interior polished in 300 MESH (sanitary level). The middle layer of tank body is made of 3 mm thick SUS304 stainless steel and can stand max. working pressure 0.09MPa. The external layer of tank body is made of 2 mm thick SUS304, and exterior polished in 300 MESH(sanitary  level).  

All  the  welding  seams  shall  be  polished  after  rubdown,  and  as  to  the treatment interface,  turned  over  edge  arc  transition  is  adopted.  The  heat  preservation layer  is made  of  PU polyurethane foaming.In the tank, there are 2 mixers:

 

3.11 Cutting and vortex emulsify mixer: 1.5kw, 0-2800 rpm (frequency control)

3.12 Low-speed frame type scraping mixer: 0.37kw, 0-40 rpm (frequency control)

3.13 Attached units of the tank: Liquid feed inlet with stainless steel pipe filter, additive inlet, vacuum inlet,  compressed  air  inlet,  breaking  vacuum  inlet,  sight  glass,  temperature sensor,  CIP  cleaning head, dustproof asepsis respiratory device.

3.2 Pretreatment boiler:

1. Volume: oil boiler of 5L and water boiler of 5L one each, material: SUS316L.

2. Structure: open (half-open) type, with mixing.

 

Detailed Technical requirements:

Effective volumes: oil boiler of 5L, water boiler of 5L, material: SUS316L, 3 layers structure. The material of the inner of tank body is made of 4mm thick SUS316L and interior polished in 300MESH (sanitary  level).  The  middle  of  the  tank  body  is  made  of  3  mm  thick SUS304  and  can  stand  max working  pressure  0.09MPa.  The  external  layer  of  tank body  is  made  of  2  mm  thick  SUS304  and exterior polished in 300MESH (sanitary level). All the welding seams shall be polished after rubdown, and  as to  the  treatment  interface, turned  over edge arc transition  is adopted.  The  heat preservation layer is made of PU polyurethane foaming. In the tank, there is a turbine mixer, 0.12kw reducer and 0-1400 rpm inlet rotary speed. Discharge hole is equipped with butterfly valve of sanitary level and pipeline.

TZRZ-5 Ointment Vacuum Emulsifier Mixer